How to Use a Fiber Media Converter in Your Network?

media converter in UAE

Media converters are slowly becoming a go-to device for every networking professional. This little device allows you to combine a variety of signaling formats into a single and well-functioned LAN. Although many solutions and options are used to offer similar ease, the technology of media converters has become simpler, compact, and more streamlined. Since this tool allows admins to repurpose the existing configurations of wires and deliver better and high-end device support, it has become a must-have IT tool in your organization. That is the backbone of LAN infrastructure and has the power to streamline your business into the Internet of Things (IoT). A media converter has many uses, and learning how to use this device will help you maximize efficiency and productivity. This article will cover the ways and methods you can implement to use media converters.

media converter in Dubai, UAESource link – https://pixabay.com/photos/server-room-datacenter-network-90389/

Using a Single Media Converter

Deploying a pair of media converters in a network is considered more standard. However, sometimes you will need a single media converter to link copper cabling and a fiber device. You must follow the process correctly to ensure the best results. The steps to linking copper wires and a fiber device using a single converter unit include:

  1. First, you should start by connecting the copper port of switch B to the RJ45 port of the media converter. You can use any Cat 5 and above UTP cable for this purpose.
  2. Once the first step is completed, plug an SFV trans receiver into an SFV slot in the converter, and then plug another SFV module into switch A.
  3. Lastly, you should insert a fiber patch cable into the SFV trans receivers on the media converter and switch A.

Using a Pair of Media Converters

A pair of media converters are more frequently used to link two copper cabling systems together to extend the transmission distance. Using them in pairs is one of the most common scenarios of media converter usage in a network. You can use a converter with network switches, trans receivers, copper, and fiber cables. The following steps will guide you throughout the process. Make sure you follow them correctly to get the best use of media converters.

  1. Start by connecting the copper port of switch A and RJ45 port of the first fiber media converter via a UTP cable.
  2. Once the above step is completed, plug an SFP module into an SFP slot of the first media converter. Afterward, plug another SFP module into the SFP slot of the second media converter.
  3. Once connected, use a fiber patch cable to connect the first and second media converters.
  4. Lastly, connect the RJ45 port of the second media converter to switch B with the help of a UTP cable.

You must keep in mind that there is no need to power the media converters when you are inserting trans receivers into the ports. Ensure that the fiber patch cable is removed before taking out the trans receiver and installing them on the media converters. Also, insert the cable into the trans receiver end face.

media converter in Dubai, UAESource link –  https://pixabay.com/photos/data-rack-network-technology-2100147/

Thing to Consider While Using Them in Network

Media converters are very uncomplicated devices. You can simply plug them in and start using them. However, you cannot ignore everything when you are connecting them. Several factors must be kept in mind when connecting a media converter to the network. Make sure to choose a flat and secure place when installing the converter. Also, leave space around the converter for ventilation. Dome other essential factors that must be followed are:

  • Ensure to keep the wavelengths of both transmitters on the media converter consistent. Thus, if you have set up a custom transmission for the first media converter, you must follow the other one. The data rate of trans receivers and media converters should also be the same. In addition to this, when using a pair of converters, make sure they both have the same type of trans receivers. This means you can use either single-mode or multi-mode on both sides.
  • The next thing to keep in mind is that the end face of the fiber cable patch must be by the port on your media converter. SC fiber patch cables are primarily used to connect media converters with SC ports, and the LC fiber patch cables are plugged into the SFP and SFP+ ports on media converters.
  • Before moving forward with the connecting process, ensure whether your converter supports half-duplex or full-duplex transmission. Knowing this beforehand will save you a lot of trouble. Use the full-duplex converters with a switch, or else the hub of half-duplex mode will cause a significant packet loss in the network.
  • The final thing you must consider before connecting media converters is the temperature. The operating temperature must be maintained within a proper and acceptable range. If this is not maintained, the media converter will fail to work. Thus, it is a crucial factor to keep in mind. The temperature may not be the same for every unit. Its parameters may vary depending on the vendor you have chosen to get your media converters. This is why you should ask your vendor about the temperature parameters before purchasing the media converter.

Final words 

Media converters are helpful and easy to manage devices capable of streaming your network. Since these tiny devices can offer better connectivity, you will get an uninterrupted network solution to increase the effectiveness of your operations. Getting your converters from a trusted source is a sure-shot way to succeed. Zoomline Networks is among the most reliable companies that offer the highest quality media converters in Dubai, UAE. You can browse our collection of products from our website or contact our expert team at +96824797861.

Main Menu