Industrial Media Converter in Dubai, UAE

A simple yet practical tool, Industrial Media Converter Dubai can be used for various applications, including factory automation and intelligent transportation systems. It is important for an industrial media converter to operate under demanding conditions with high levels of electromagnetic interference. The need for media converters has increased over the years with the IIoT trend.
Zoomline Network industrial media converters are lightweight, reliable, and provide efficient media conversion in various settings. Serial and Ethernet media converters belong to the category of industrial media converters.

Ethernet Media Converter converts fibre to Fast Ethernet. These Convertors are incredibly stable and easy to use. Some devices can alert remote or central management systems using the link loss forwarding feature when the link status changes. It simplifies and speeds up troubleshooting. Additionally, the JetCon 3701G has PoE, allowing it to continue operating even when there is no power source. Zoomline Network Serial Media Converter enables seamless communication between devices with different serial interfaces compared to other Industrial Media Converter Dubai. Jetcon 2201 and Jetcon 1201 serial-to-serial media converters can convert between RS232, RS422/RS485. The conversion of these three interfaces to fibre optics is assisted by serial to fibre media converters such as the Jetcon 2401.

Read more
  • 10-100 PoE Industrial Ethernet-to-fiber ...

    1. Built-in efficient switching core to implement flow control and reduce broadcast packets
    2. Standard: IEEE802.3u 100BASE-FX, IEEE802.3u 100BASE-TX, IEEE802.3 10BASE-T, IEEE802.3x Flow Control, IEEE802.3at
    3. 10/100Base-TX can automatically identify the direct line and cross-line, is compatible with Various cards, switches, HUB and other Ethernet devices
    4. This 10-100 PoE Industrial Ethernet-to-Fiber Converter uses a store-and-forward mechanism to avoid packet loss and error frames
    5. Support cut-through transmission and full-duplex flow control / half-duplex back pressure mode
    6. Support jumbo frame up to 9K(cut-through mode)
    7. 12V to 48V DC or 24V AC Wide power input, redundant power and reverse polarity protection
    8. -40 To 80℃ operating temperature to meet various tough environments
    9. IP40 protection standard housing
    10. Power port and Ethernet port supports ESD protection and EFT protection
    11. DIN rail and panel mounting for efficient usage
    12. Support dual-fiber multi-mode, dual-fiber single-mode and single-fiber single-mode fiber port selection, expanded the needs of users
    13. Support DIP switches for operation mode setting
    14. Support POE power supply up to 25.5W(optional)
  • 2 ports Industrial full gigabit PoE Medi...

    With 1*10/100/1000M PoE port and 1*1000M SFP port;
    Supports relay alarm for power off, network broken and PoE off;
    Supports 6KV surge protection, 6KV contact / 8KV air ESD protection;

    Supports working temperature -40℃~75℃.

  • Indusrtial gigabit media converter...

    1. Built-in efficient switching core to implement flow control and reduce broadcast packets
    2. Standard:IEEE802.3 10Base-T, IEEE802.3u 100Base-TX/FX, IEEE802.3ab 1000Base-T, IEEE802.3z 1000Base-SX/LX, IEEE802.3x Flow Control, IEEE802.3at PSE
    3. 10/100/1000Base-TX can automatically identify the direct-line(MDI) and cross-line(MDIX), is compatible with Various cards, switches, HUB and other Ethernet devices
    4. It applies store-and-forward mechanism to avoid packet loss and error frames
    5. Support wire-speed transmission and full-duplex flow control / half-duplex back pressure mode
    6. Jumbo frames support a maximum of 1536 bytes
    7. 12V to 52V DC or 24V AC Wide power input, redundant power and reverse polarity protection
    8. -40 to 80 ℃ operating temperature to meet a variety of complex environments
    9. IP40 protection standard for housing
    10. Power port and Ethernet port supports ESD protection and EFT protection
    11. DIN rail and panel mounting for easy installation.
    12. Support Dual-fiber multi-mode, dual-fiber single-mode and single-fiber single-mode fiber port selection, expanded the needs of users
    13. Support POE power supply up to 25.5W(optional)
    14. Support SFP fiber module
  • Industrial 10/100 Fast Ethernet Media Co...

    1. Built-in efficient switching core to implement flow control and reduce broadcast packets
    2. Standard: IEEE802.3u 100BASE-FX, IEEE802.3u 100BASE-TX, IEEE802.3 10BASE-T,
    3. IEEE802.3x Flow Control, IEEE802.3at PSE
    4. 10/100Base-TX can automatically identify the direct line and cross-line, is compatible with Various cards, switches, HUB and other Ethernet devices
    5. It uses a store-and-forward mechanism to avoid packet loss and error frames
    6. Support cut-through transmission and full-duplex flow control / half-duplex back pressure mode
    7. Support jumbo frame up to 9K(cut-through mode)
    8. 12V to 48V DC or 24V AC Wide power input, redundant power and reverse polarity protection
    9. -40 To 85℃ operating temperature to meet a variety of complex environments
    10. IP40 protection standard housing
    11. Power port and Ethernet port supports ESD protection and EFT protection
    12. DIN rail and panel mounting for efficient usage
    13. Support dual-fiber multi-mode, dual-fiber single-mode and single-fiber single-mode fiber port selection, expanded the needs of users
    14. Support DIP switches for operation mode setting
    15. This Industrial Media Converter Support POE power supply up to 25.5W(optional)

Main Menu