Fast Ethernet Over UTP Cable Transceiver

In stock

  1. Modulation frequency: 2 MHz-28 MHz
  2. Modulation method: OFDM
  3. Encryption: AES128-bit encryption
  4. Networking: One Master and 7 Slaves
  5. Protocol:IEEE802.3/u, 10Base-T, 100Base-TX, IEEE802.1Q VLAN, IEEE802.3af/at
  6. Support Auto-sensation of MDI/ MDIX at Ethernet port, compatible with NIC, switch and HUB etc.
  7. Support up to 1522Bytes data packet
  8. Support Store and forward working mode; backpressure on Half-Duplex and flow control Full-Duplex.
  9. Power supply range: DC 12V-52V;
  10. Working temperature: -20-70℃
  11. Support Ethernet ESD protection and EFT
  12. PoE (15.4W) and POE+ (25.5W) supported

N-net Ethernet Over UTP Cable Transceiver

At the same time, with the development of high-definition TV, broadband Internet access and other services, EoC equipment needs to provide higher bandwidth to support Radio and television operators’ subsequent business expansion.

N-net model NT-ENU4100 Ethernet Converter is an UTP Cable Converter. One UTP transceiver at the remote end can support one or multi IP network devices. This EO2 can transmit over telephone line, Ethernet cable, and twisted pair. With the Ethernet extended to 750meter, it has enlarged the Ethernet network application area, cutting down the project cost by using Cat5e or Cat6 cable.

From the perspective of technical subdivision, various EoC subdivision technologies coexist in the market, mainly including HomePlug, HomePNA, Moca and down-conversion WiFi. Among them, HomePlug technology has the highest stability, the cost of bidirectional transformation is lower, and the physical layer The rate is higher, so its application is also the most extensive.

N-net model NT-ENU1400-AF/ AT series is the EO2 with Power Over Ethernet function, powering remote Eo2 transceivers and their connected IP network device, default as a master terminal.

Download Documents

No Document File Found here

See It Styled On Instagram

    Instagram did not return any images.

Main Menu