Product By Category
POE Switch (8)
Ethernet Switch (3)
POE+ Switch (4)
Industrial Ethernet Switch (11)
Industrial Media Converter (4)
Video Converter (2)
MEDIA CONVERTER DUBAI, UAE (5)
Media Converter Chassis (3)
Ethernet Over Coax Converter (2)
Passive Optical network (PON Series) (3)
Serial Device Server (1)
Fibre Optic Modem (2)
- Zero-Delay automatic forwarding
- Supporting three types of interfaces:RS-232/485/422
- Automatic detection of serial port rate judgment and control of data transmission direction
- Working wavelength:850nm(multi-mode):1310nm(single mode)
- Maximum communication rate:500kbps
- Optional optical interfaces: SC/ST/FC
- Up to 2 kilometers in multi-mode transmission and up to 40 kilometers in single mode transmission
- Broad voltage inputs:5~40V DC or 85~265VAC
- The interface supports 1500W surge protection and 15KV ESD protection
- External power supply
- No PC, can be two consecutive serial devices over a network peer connection mode
- All signals built in 1.5KV surge protection
- Can be configured through the network Web
- Provide TCP Server, TCP Client, and UDP Socket variety of operating modes
- 2-wire or 4-wire RS485 automatic data flow control
- Asynchronous transmission, point to point utilization rate up to 115200bps
- Support 5-16V wide power input
- IEEE 802.3ah EPON
- China telecom/Unicom GEPON standard
- 20Km for single fibber
- Access 64 terminals for single fibber PON
- Uplink and downlink triple churning encrypted function
- ONU terminal legitimacy certification, report illegal ONU registration
- DBA algorithm
- Standard OAM and extended OAM
- ONU batch software upgrade, fixed time upgrade, real time upgrade
- PON transmit and inspect receiving optical powe
- Plug and play, features auto-detecting, auto-configuration, and auto firmware upgrade, etc.
- Support triple churning encryption request
- Support DBA reporting mechanism request
- Support OAM remote configuration maintenance function
- Support the remote upgrade and download
- Support status detection and fault report
- Support to configure the work mode at the user port.
- Support data encryption and decryption
- Support 802.1Q VLAN
- Support rich QinQ VLAN functions and IGMP Snooping
- Support traffic rule to modify the related priority.
- Support LED indication
- Support to restore the factory settings
- Support the remote reset and reboot
- Support dying gasp outage alarm
- Fully compatibility with OLT based on ZTE chipset.
- Upgrade any legacy CCTV system without the expense of re-cabling, use existing coax for transmission of IP video, swapping analogue cameras for IP/Megapixel models.
- Support 10/100 Base-T Ethernet to be transmitted over coaxial cable.
- One transmitter at remote end can support PoE+(30W) to IP camera.
- Up to 14 receivers at central housing can be rack-mounted to 2U chassis (NT-R14), connecting up to 14 cameras.
- Status LEDs indicate power, link connectivity/ activity for RJ45 and BNC ports.
- Sub-industrial design, working temperature range -20~70℃.
- High performance in thunder prevention and anti-jamming.
- Q9 regular BNC video connector (crimp terminal optional)
- Up to 500m over RG59, 350m over SYV75-3(64)
- Modulation frequency: 2 MHz-28 MHz
- Modulation method: OFDM
- Encryption: AES128-bit encryption
- Networking: One Master and 7 Slaves
- Protocol:IEEE802.3/u, 10Base-T, 100Base-TX, IEEE802.1Q VLAN, IEEE802.3af/at
- Support Auto-sensation of MDI/ MDIX at Ethernet port, compatible with NIC, switch and HUB etc.
- Support up to 1522Bytes data packet
- Support Store and forward working mode; backpressure on Half-Duplex and flow control Full-Duplex.
- Power supply range: DC 12V-52V;
- Working temperature: -20-70℃
- Support Ethernet ESD protection and EFT
- PoE (15.4W) and POE+ (25.5W) supported
- The configuration of active/standby power supply ensures interruptible operation of the system
- Provide two power supplies (AC 220V, and DC -48V), enabling the system to work under many operating environments
- Supporting simultaneous operation of several module-type media converters at different rates, which greatly improves system adaptability
- Each card supports hot swapping
- Applicatory module types: NT-1100P series, and NT-3011P series
- 10/100Mbps auto-sensed, facilitating network upgrade
- Built-in efficient switching core to implement flow control and reduce broadcast packets
- Full-duplex and half-duplex auto-sensed
- Supporting auto-sense of MDI/MDI-X, facilitating system commissioning and installation
- Supporting half /full-duplex of FX.
- Supporting 10/100Mbps store-and-forward and 100Mbps cut-through transmission.
- Supporting the transmission of 100Base-FX or STM-1, compatible with other devices
- Supporting low-time lag transmission
- Supporting the transmission of extra-long packets up to1600 bytes
- Extremely low power consumption (less than 2W), reliable and stable performance
- Options in single mode dual fiber or Multi-mode dual fiber.
With the increasing demand for network management of equipment by operators, it is believed that the network management of fiber optic transceivers will become increasingly practical and intelligent.
NT3011 10/100/1000Mbps adaptive Gigabit Ethernet Media Converter adopts switching technology to fulfill media conversion.
10G Unmanaged Ethernet Media Converter Features:
- Diversified interfaces including SFP+, RJ45, and XFP.
- Supports 3R (Re-generation, Re-timing, Re-shaping) performance for extending network cable coverage
- Supports Jumbo Frame
- Provide reliable long distance connection.
- Compact design, plug and play
- Support LFP function.
- Support Q-in-Q function, Optical port and Ethernet port can be set separately as dual Tag ports, and can be set as ISP Tag and ISP Tag TPID at will.
- Can query and configurate the operation mode of each port on local and remote devices, including port speed, full/half-duplex, and flow control, etc, and can display the real-time status of each port.
- Support bandwidth-limiting function: with the step of 64kps, the bandwidth can be set between 0Mbps and 100Mbps at will.
5.Offer MIB library files, support OpenView.Snmpc, and other softwares.
- Support link line-speed loopback, convenient for line debugging