Product By Category
Ethernet Switch (3)
POE+ Switch (4)
Industrial Ethernet Switch (7)
Industrial Media Converter (4)
Video Converter (2)
Media Converter (5)
Media Converter Chassis (3)
Ethernet Over Coax Converter (2)
Passive Optical network (PON Series) (2)
Serial Device Server (1)
Fibre Optic Modem (2)
Industrial Outdoor PoE Switch (1)
Receiver support one way SDI split into two function
Max transmission bit rate up to 1485Mbps
Support video input formats transparent transmission
Compatible with uncompressed HD video as 720p.1080i.1080p@30fps etc.
Equipped with automatic multi-rate cable equalizer(100M/120M)
Support cable driver, balance transmission loss over cable
Support pathological signal transmission
Support SNMP and real-time monitoring on working status of board.
Provide long distance transmission of SDI video.
Thunder protection technology, surge protection 4kv
simple-to-setup, plug and play, receiver rack-mountable to chassis
Support RS485, Manchester/ Biphase data
Overload protection, auto recovery
- Uncompressed 8 bit video digital sampling, High-speed synchronous digital transmission technology
- Modular structure design(audio card and data card for optional configuration)
- Super optical dynamic range, no adjustment needed
- Status indication for power supply, optical signal and video
- No electromagnetic interference, radio frequency interference and ground current
- Safe transmission guaranteed under poor electromagnetic environmen
- BNC video connector
- FC optical connector
- Video DC recovery
- Maximum tolerable link loss for single mode single fiber is 18db
- Built-in efficient switching core to implement flow control and reduce broadcast packets
- Standard: IEEE802.3u 100BASE-FX, IEEE802.3u 100BASE-TX, IEEE802.3 10BASE-T, IEEE802.3x Flow Control, IEEE802.3at
- 10/100Base-TX can automatically identify the direct line and cross-line, is compatible with Various cards, switches, HUB and other Ethernet devices
- This 10-100 PoE Industrial Ethernet-to-Fiber Converter uses a store-and-forward mechanism to avoid packet loss and error frames
- Support cut-through transmission and full-duplex flow control / half-duplex back pressure mode
- Support jumbo frame up to 9K(cut-through mode)
- 12V to 48V DC or 24V AC Wide power input, redundant power and reverse polarity protection
- -40 To 80℃ operating temperature to meet various tough environments
- IP40 protection standard housing
- Power port and Ethernet port supports ESD protection and EFT protection
- DIN rail and panel mounting for efficient usage
- Support dual-fiber multi-mode, dual-fiber single-mode and single-fiber single-mode fiber port selection, expanded the needs of users
- Support DIP switches for operation mode setting
- Support POE power supply up to 25.5W(optional)
- With 8*10/100/1000M downlink ports,2*1000M SFP ports;
- Provides two modes of Default and VLAN to adapt to various complex environments;
- 6KV surge protection, 8KV contact /15KV air ESD protection;
- Support working temperature -40℃~75℃.
With the increasing demand for network management of equipment by operators, it is believed that the network management of fiber optic transceivers will become increasingly practical and intelligent.
NT3011 10/100/1000Mbps adaptive Gigabit Ethernet Media Converter adopts switching technology to fulfill media conversion.
- 24x 10/100Mbps downlink PoE Ethernet Ports, 4x 10/100/1000Mbps uplink Ethernet Ports and 4x1000Mbps uplink SFP Ports ,or 4x 1000M Gigabit Ethernet COMBO ports
- Each of 24 ports all support IEEE802.3af/at
- DHCP Snooping, DHCP Relay , LACP, IP Source Guard, ARP inspection, ACLs etc.
- Store-and-forward mechanism is employed to avoid packet loss and error frames
- Support spanning tree STP(802.1D) and RSTP(802.1W) and MSTP(802.1S)
- Support IP/Port/Mac binding.
- Jumbo frames support a maximum of 9.6K kilobtyes
- Support enhanced management through WEB, CLI, SSH, SNMP.
- Maximum power per port: 30W
- Maximum PoE power: 440W (Port 1 to Port 24)
- Built-in 1U rack power supply series, easy installation
10G Unmanaged Ethernet Media Converter Features:
- Diversified interfaces including SFP+, RJ45, and XFP.
- Supports 3R (Re-generation, Re-timing, Re-shaping) performance for extending network cable coverage
- Supports Jumbo Frame
- Provide reliable long distance connection.
- Compact design, plug and play
- The configuration of active/standby power supply ensures interruptible operation of the system
- Provide two power supplies (AC 220V, and DC -48V), enabling the system to work under many operating environments
- Supporting simultaneous operation of several module-type media converters at different rates, which greatly improves system adaptability
- Each card supports hot swapping
- Applicatory module types: NT-1100P series, and NT-3011P series
With 1*10/100/1000M PoE port and 1*1000M SFP port;Supports relay alarm for power off, network broken and PoE off;Supports 6KV surge protection, 6KV contact / 8KV air ESD protection;
Supports working temperature -40℃～75℃.